Step 1:
Install the eCB1 and connect it to the power supply.
Step 2
: Connect the eCB1 to your network, a PC or laptop using a LAN cable (see
diagram).
Please note
: Make sure that only one unconfigured eCB1 is connected in your network to
avoid name collisions.
1. Start your browser
2. Type in the following URL „
http://ecb1.local
“ (see image below).
→ The user interface of the eCB1
opens
.
If the user interface does not open, please check the following points:
1. Name resolution does not work
Configuration instructions
eCB1
smartmeter
Version: 1.2.3
5
Connect the eCB1 to your
network using a LAN cable
and insert it into the LAN
port of the eCB1.
Connect your PC/laptop with
your network/router by
inserting the LAN cable into
the LAN port.
