background image

54

HARDI

®

 New NAVIGATOR OPERATOR’S MANUAL

      8.  Subject to the following terms, conditions and contributions, HARDI

®

 extends the warranty on polyethylene 

tanks (excluding fi ttings, lids and gaskets) to FIVE YEARS. To qualify for this extended warranty, the 
tank must be drained and fl ushed with fresh water after each day of use. HARDI

®

’s liability is limited to 

replacement of the tank, FOB our plant at no cost to the purchaser during the fi rst twelve months; at 20% of 
the then current price during the second year ; at 40% during the third year ; at 60% during the fourth year; 
and at 80% during the fi fth year. This fi ve year extended warranty is subject, in each instance, to the tank 
being inspected and approved for replacement or repair by HARDI

®

 personnel before HARDI

®

 will accept 

any liability hereunder.

      9.  Subject to the following terms, conditions, contributions, HARDI

®

 extends the warranty on HARDI

®

 

diaphragm pumps (excluding wearing parts such as diaphragms, valves, etc.) to FIVE YEARS. To qualify 
for this extended warranty, the pump must be drained and fl ushed with fresh water after each day of 
use. HARDI

®

’s liability is limited to replacement of defective parts, FOB our plant at no cost to the to the 

purchaser during the fi rst twelve months after date of purchase, at 20% of the then current retail price 
during the second year ; at 40% during the third year ; at 60% during the fourth year ; and at 80% during the 
fi fth year. This fi ve year extended warranty is subject, in each instance, to the pump being inspected and 
approved for replacement or repair by HARDI

®

 personnel before HARDI

®

 will accept any liability hereunder.

      10. HARDI

®

 reserves the right to incorporate any change in design in its products without obligation to make 

such changes on units previously manufactured.

      11. The judgement of HARDI

®

 in all cases of claims under this warranty shall be fi nal and conclusive and the 

purchaser agrees to accept its decisions on all questions as to defect and to the exchange of any part or 
parts.

      12. No employee or representative is authorized to change this warranty in any way or grant any other warranty 

unless such change is made in writing and signed by an offi cer of HARDI

®

 at it’s head offi ce.

      13. Any warranty work performed which will exceed $400.00 MUST be approved IN ADVANCE by the Service 

Manager.

      14. Any pump replacement must be approved in advance by the Service Manager.

      15. Claims under this policy must be fi led with HARDI

®

 within thirty (30) days of work performed or warranty 

shall be void.

      16. Parts requested must be returned prepaid within thirty (30) days for warranty settlement.

      17. Warranty claims must be COMPLETELY fi lled out properly or will be returned.

      DISCLAIMER OF FURTHER WARRANTY

            THERE ARE NO WARRANTIES, EXPRESSED OR IMPLIED, EXCEPT AS SET FORTH ABOVE. 

THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION OF THE PRODUCT 
CONTAINED HEREIN. IN NO EVENT SHALL THE COMPANY BE LIABLE FOR INDIRECT, SPECIAL OR 
CONSEQUENTIAL DAMAGES (SUCH AS LOSS OF ANTICIPATED PROFITS) IN CONNECTION WITH 
THE RETAIL PURCHASER’S USE OF THE PRODUCT.

WARRANTY POLICY AND CONDITIONS

Summary of Contents for New NAVIGATOR 1100





























































Reviews: