9
GB 05 01 02
B
C
T021-
Connecting the MARRO lift
Connecting the MARRO lift
Connecting the MARRO lift
Connecting the MARRO lift
Connecting the MARRO lift
The MARRO is designed for three point suspension and
is equipped with semi automatic hitch for the tractor lift
arms (cat. II wide).
1. Fit the carrier rod in tractor lift arms and secure with
10 mm pins A.
2. Lower tractor lift arms
3. Reverse tractor till carrier rod
is under the sprayer hitch
4. Lift the lift arms carefully till
the locking devices “clicks”
and the carrier rod is locked
to the sprayer frame
5. Fit the top bar, secure with
pins
6. Lift the sprayer
7. Retract each of the four
support legs
Retraction of support legs
1. Remove the lock pin.
2. Push up the support leg till the lower hole B in the
inner profile matches the hole C in the outer profile.
3. Fasten this position by the pin A.
4. Position the tractor lift so the boom can be lowered to
45-50 cm in lowest position, and adjust top bar until
the gantry is perpendicular to the ground.
støtteben mega
Conversion between cat. II and cat. III
Both the semi automatic hitch and the 3-point linkage
frame for front tank are standard cat. II wide. For use
with cat. III use bushes A (ref. no. 147575). Secure with
lock pin.
The clevis for top bar is standard cat III. For use with cat.
II use bushes B (ref. no. 147576).
T021-023x
A
B
Summary of Contents for MARRO TWIN FORCE 1000
Page 2: ...2 ...
