Hardi MARRO TWIN FORCE 1000, Instruction Book

Page: 13 / 64

13
GB 05 08 03
T T
T T
Trrrrranspor anspor
anspor anspor
ansport position t position
t position t position
t position
The height and width of the transport brackets can be
set in different positions. Choose a setting which gives
sufficient clearance from the tractor cabin.
IMPORTANT! Make sure that max. transport height and
width are not exceeded.
Height setting Height setting
Height setting Height setting Height setting
NOTE! The rear settings must correspond to the front
settings so the boom is resting on the front as well as
rear brackets.
WARNING! The max. transport height must
never exceed 4.0 m (13.1 ft) Always measure the
actual total height, and choose settings not
exceeding 4.0 metre.
Transport lock
The setting of the transport lock determines the bearing
point of the boom when it rests in the transport brackets.
The setting is adjustet by means of the hole combination
in the brackets A + B.
1. Lift and unfold
inner sections till
lock is disen-
gaged.
2. Loosen and
remove the two
bolts, which
keep the parts A
and B
assembled.
3. Reassemble A
and B according
to the desired
hole combina-
tion.
NOTE! Always use both
bolts to assemble the lock
Transport brackets
The height of the transport brackets can be adjusted up
and down as shown on the drawing.
Simply loosen the bolts in
both sides, adjust the
height of the brackets
and fasten the bolts
again according to new
position.
Width setting Width setting Width setting Width setting Width setting
The width of the sprayer can be independently adjusted
for each side, Be aware of the risk of
sideway movements of the folded
boom during transportation and
make sure to leave suffi-
cient room for such
in the width
setting.
Boom tr Boom tr Boom tr Boom tr Boom transpor anspor anspor anspor ansport saf t saf t saf t saf t safety c ety c ety c ety c ety chains (if hains (if hains (if hains (if hains (if f f f f fitted) itted) itted) itted) itted)
Fit the safety chains as shown before transport on public
road.
A
T021-0017x
B
T021-0023x
T101-0031
T021-0017x
T030-0001