manualshive.com logo in svg

Hardi MARRO TWIN FORCE 1000, Instruction Book

Share
Download
Hardi MARRO TWIN FORCE 1000 Instruction Book Download Page 33

33

GB 11 02 01

Disconnecting the fr

Disconnecting the fr

Disconnecting the fr

Disconnecting the fr

Disconnecting the front tank

ont tank

ont tank

ont tank

ont tank

Disconnect the hoses (please see  next page) before
disconnecting the front tank.

Parking stand for front tank (Optionmal equipment)

A parking stand (ref. no. 833269) can be used for
parking the front tank when not used.

The height of the legs can be adjusted.

Disconnecting the MARRO

Disconnecting the MARRO

Disconnecting the MARRO

Disconnecting the MARRO

Disconnecting the MARRO

Always clean the sprayer - inside and outside - before dis-
connecting and parking it.

WARNING!

 To prevent the sprayer from tipping

over, do not disconnect the sprayer from the trac-
tor with the booms unfolded unless the boom is

supported!

Remember to disconnect all hoses and cables from the
tractor.

WARNING!

 If the sprayer is parked unattended

avoid unauthorised persons, children or animals
having access to the sprayer.

Disconnecting the MARRO lift

Disconnecting the MARRO lift

Disconnecting the MARRO lift

Disconnecting the MARRO lift

Disconnecting the MARRO lift

IMPORTANT!

 The MARRO lift must be placed on a level

and hard foundation. Failure to do so may cause settling
of support legs - and the sprayer will tip over. If neces-
sary, place the sprayer on a bearing plate to prevent this.

Max.ground inclination: 8.5°.

1. Remove the pin.
2. Pull down the support leg
     till the upper hole in the inner
    profile matches the hole A in
     the outer profile.
3. Fasten this position by the pin.

NOTE! All of the 4 support legs must be pulled down
before lowering and disconnecting the sprayer.

4. Lower the sprayer
5. Disconnect top bar, stop

engine and disconnect
PTO-shaft, hydraulics
and electric cables

6. Pull the string to disen-

gage the semi auto-
matic hitch locking
devices and lower the
lift arms fully

T021-0016x

A

semikobling me

T021-0004x

Summary of Contents for MARRO TWIN FORCE 1000

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands