16
If you wish to use the fan WITHOUT the light kit,
remove the three preassembled switch housing cap
screws (N) from switch housing cap (M) located at
top of light kit fitter (F).
Remove the preassembled hex nut (K) and lock
washer (L) from threaded rod at the top of light kit
fitter (F). Unscrew switch housing cap (M) to remove
it from the light kit fitter (F), and then gently feed the
BLACK and WHITE wires from the light kit fitter (F)
out through the hole in the middle of the switch
housing cap (M).
F
L
M
K
WHITE
BLACK
1.
1
2.
Hardware Used
Cap
x 1
AA
Place cap (AA) firmly in hole in middle of switch
housing cap (M). Align holes in switch housing cap
(M) with holes in switch housing, then attach switch
housing cap (M) with previously removed switch
housing cap screws (N).
Note:
Make sure to align
notch on top edge of the switch housing cap (M) with
the reverse switch on switch housing for the correct
fit.
2
AA
N
N
M
Switch
Housing
Notch
Reverse
Switch
3.
3
U
Attach applicable pull chain extension (U) or
custom pull chain extension (not included) to the
fan pull chain.
INSTALLING FAN WITHOUT LIGHT KIT
N
