15
FINAL INSTALLATION
8. Locate rubber washer (Q), hex nut (K), finial
plate (I), and finial (O) that were previously
removed (Step 6, page 14). Place rubber washer
(Q) inside glass shade (P) over center hole. Align
hole in center of glass shade (P) with threaded
rod on light kit fitter (F), allowing pull chains to
come through corresponding holes in glass
shade (P). Push up gently on glass shade (P)
until threaded rod comes through hole. (
Be sure
fan pull chain does not rub against bulbs during
fan operation.
) Secure glass shade (P) with hex
nut (K), finial plate (I) and finial (O).
CAUTION:
Do NOT overtighten finial (O) as
glass may crack or break.
9.
9
(For Fan)
(For Light)
U
Attach applicable pull chain extensions (U) or
custom pull chain extensions (not included) to
the fan and light pull chains.
Assembly is now complete.
8
P
O
Q
F
K
I
