31
2. Visually inspect all hoses for signs of chaffing or leaks. Report any damage
immediately to supervisor or manager.
3.
WARNING!
Water at high-pressure jetting from a damaged hose or hose connector
can cause serious injury. Do not attempt to repair or secure any hose while the high-
pressure pump is running.
(H&S Sections 3 and 6)
With the Jetter
running:
4.
Make further inspection for leaks. If a leak is observed, shut down immediately and
report the leak to a supervisor or manager.
5.
Check all lugnuts on both tires and torque to approximately 90 lbs / ft.
6. The green wheel lug indicators should be pointing in the right direction.
Summary of Contents for E Series
