HARBEN E Series, Operation & Maintenance Manual

Page: 23 / 80

21
Button 6 – menu scroll
Speed/pressure down
c
Engine start/stop
Radio control layout
4.5. Running the Engine (Manual Mode)
With two people, one at the pump set and one in charge of the nozzle or gun. (H&S Sections
3, 4, 8, 9, 11, 15, and 16)
Tank water level
Ensure you have an adequate water supply and that the water tank is filled to the ball valve
shut off level.
If your machine is fitted with a radio remote control go to section 4.6.
1. Switch on unit using toggle switch.
2. The control system will go through a prestart (glow plugs).
3. Enter password ‘2010’ to enter.
4. You will now enter the run screen.
5. Ensure the open ended, high-pressure hose is in a safe position, preferable within
sight of the operator at the control panel. (H&S Sections 3 and 6)
6. Press the engine start button.
7. The engine will now start and run in idle.
8. The user can now increase and decrease the speed of the engine using the engine up
and down speed.
Radio control screen
cc
Water on/off
cc
Speed/pressure up
Button 5 – menu scroll
cc
NOTICE : Do NOT allow unfiltered water into the pump.