26
4.11. Frost Precautions
During cold periods there is a risk of freezing overnight or when travelling on the road. Damage
caused by freezing is expensive to repair and IS NOT COVERED UNDER WARRANTY.
(H&S
Sections 3 and 7)
Take the following precautions to avoid frost damage:
4.11.1.
To Anti-Freeze the Machine with an Antifreeze Tank:
1.
The valves to control the antifreeze procedure are located as shown
2.
Shut the tank isolation valve
3.
The handle for the 3-way ball valve should be in the vertical position.
4.
Open the tank drain valve
5.
Put the jump jet valve into the “off” position
Anti-freeze
valve
Drain valve
Tank isolation
valve
3-Way Ball Valve
Summary of Contents for E Series
