HappyJapan HCR3, Instruction Book

Page: 87 / 253

-R3 -47
Thread break
9-7b
SEWING
9_8 P801
Mending the faulty part of embroidery (MENDING)
Mending the parts where have not be embroidered because of any trouble such as thread
break.
CAUTION: To prevent accidents.
After mending all heads start working
immediately.
Keep hands away from the needles.
1. When the machine is stopped, keep press
STOP
(*trace back) until you back to the
window you want to work.
2. Press the mending switch for head you want
to mend.
3. Press the
START
button.
Start mending.
The machine will mend head only where thread
break jump lights or blinks.
All heads will start to sew 2 stitches before mend-
ing finishes. When mending finishes,
the machine will go on normal sewing.
In course of mending, when you press this
switch for head not conducting mending, the
machine will mend from this point.
In case thread cut takes place by color
change etc. while doing mend sewing, head
not doing mend sewing doesn’t activate
thread cut because its needle doesn’t come
down.
Mending switch
MENDING
THREAD
BREAK
DETECT.
ON
OFF
JUMP
FWD
START
CUT
STOP
MENDING
THREAD
BREAK
DETECT.
ON
OFF
JUMP
FWD
START
CUT
STOP
STOP
START