HappyJapan HCR3 Instruction Book Download Page 62

Page: 62 / 253

-3A -41

7-2

CAP FRAME option

Installing and removing the cap drive frame

The cap drive frame must be installed onto the X carriage to embroider a cap.

Please remove by reverse order of these step.

7-2 QA01

1. With machine powered off, move the X

carriage back and forth by hand and note

the resistance before mounting the cap drive

frame.

2. Each Cap frame base have number label for

fixing location.

Please set the Tubular frame bracket in the

order right to left.Fix the cap frame base

under the bracket of the X carriage and

tighten the knob screws completely.

X carriage

Bracket

Cap frame

base

Knob

screws

CAUTION: To prevent accidents.

The frame moves quickly.

Keep hands away from the frame.

3. Turn on the power switch.

Push the power switch firmly so it will remain on.

Confirm that there are “Cap (Std.)” or “Cap

(Wide)” in the display.

If these icons are not in the display, please return

to “How to turn on the machine” on previous page

and change the cap frame.

4. Press

The carriage and frame will move slightly and

then the embroidery frame will return to the previ-

ous position automatically.

Cap frame base

OFF

Forth Back

Number

Summary of Contents for HCR3






























































































































































































































































Search results

Summary of Contents for HCR3

Reviews:

Brands by name

Popular brands

HappyJapan HCR3, Instruction Book

Search results

Summary of Contents for HCR3

Reviews:

Brands by name

Popular brands