manualshive.com logo in svg

HappyJapan HCR3, Instruction Book

Share
Download
HappyJapan HCR3 Instruction Book Download Page 70

-DA    -53

7-A

CAP FRAME option

7-A   M717

7. Remove the cap holder frame from the cap

stretcher.

8. As shown in Fig. 5, install the cap frame on

cap in the drive frame.

Rotate the cap frame as show in the Fig 5 so

that the brim of the cap cannot hit the

machine. Then, push the holder lever in the

3 places shown in the arrow in Fig. 5, and

install the cap frame in the cap drive frame

so that so that the center guide of the drive

frame fits the concave area of the cap frame.

Confirm that the cap frame is firmly installed on

the cap drive frame without any gap.

Clip

Clip

Lever for clip

6. As shown in Fig. 4, tip the cap

stretcher forward.

Clip the back of the cap and

nonwoven fabric in two places.

Make the clip livers face each other.

Fig. 4

Fig. 5

Hold

lever

Cap drive

frame

Center

guide

If there is a gap between the cap frame and the

cap frame drive or the holder lever does not fit

the hole of the cap frame, adjust loosen the set

screw on the hold lever to adjust the position.

Summary of Contents for HCR3






























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands