HappyJapan HCR3, Instruction Book

Page: 63 / 253

-3A -42
7-3
CAP FRAME option
7_4 QA01
Cap drive frame Bed
Cap drive frame Cap frame base
Clamps
5. Press and Press .
The embroidery frame will move to the center .
CAUTION: To prevent accidents.
The frame moves quickly.
Keep hands away from the frame.
6. Turn off the machine.
7. Insert cap drive frame with head number
sticker labeled for respective head in bed.
This work requires firstly to insert drive
frame assembly for even numbered heads
and secondly insert cap drive frame
assembly for odd numbered heads.
When holding the cap drive frame, be sure to
also hold onto the rotary cylinder. If you hold the
rail bracket, fingers may be caught between the
rail bracket and rotary cylinder or the rail bracket
may be knocked out of place.
For machines with needle distance of 360mm,
if you insert cap drive frame for odd numbered
heads firstly, you can’t insert cap drive frame for
even numbered heads.
8. Move the cap drive frame towards the X
carriage to place it on cap frame base, then
shut the clamps.
Temporary fix right and left bracket of the
cap drive frame below the X carriage by
knob screws.
This work also requires firstly to insert even
numbered leads, then go to odd numbered
heads.
Head number sticker
Knob screws
Bracket
X carriage
ON
OFF
X carriage