HappyJapan HCR3, Instruction Book

Page: 8 / 253

-R3 -5
SETTING UP THE MACHINE
for qualified personnel only
2_1 P801
2-1
The power cable from the machine has 3 cords which are L(Live: Brown), N(Neutral: Blue) and
PE(Earth:Yellow/Green).
Connect brown cord to Live, blue cord to Neutral and yellow/green cord to Earth.
In case a plug is used for power connection, a plug has to have more capacity than voltage and
ampere of the machine (Recommendation: More than AC250V 10A), and which is following
safety standard of country.
The power cable from the machine
• Across Section (Wire) 2.5mm ^2 (AWG14) X 3
• Cord diameter (Outer) 9 - 10mm
CAUTION
-
Connection to power source, earth and a plug should be done by
qualified electric engineer.
If there is question, please contact with service staff of a agent.
DANGER
- Connect to earth tightly.
Looseness of connection to earth causes machine trouble, electric leakage and a fire.
In case using a breaker with electric leakage detector, please use a breaker which has
detecting function for leakage of high frequency current. If breaker does not have this function,
power trip can be happened frequently.
Connection to power source
N
L
PE
Commercial
power source
Live
M4 Terminal
Brown
Blue
Yellow / Green
Earth
Neutral
Disposal of a battery
A battery is had built-in to this embroidery machine.
When you dispose of a battery, according to each country or a method
determined in each area, please dispose appropriately.