manualshive.com logo in svg

HappyJapan HCR3, Instruction Book

Share
Download
HappyJapan HCR3 Instruction Book Download Page 41

-R3    -18

TURNING THE MACHINE ON

3_6   P801

5

-

1b

 DANGER: To reduce the risk of electric shock.

Never leave the machine unattended when plugged in.

Always unplug this machine from the electrical outlet immediately after use and before 

performing any maintenance on it.

 

WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons.

Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

4.  Select the desired frame with 

  

.

  : Tubular round frame

  : Tubular square frame

 

 

 : Cap  and One-point frame. 

  : Border frame

  : Sock frame

  : User-defined frame

  : Non registered

5.  Select desired type of frame and Press 

.

 

The display returns to the view of Step 2.

To disconnect, switch the power switch to the 

off position, then remove plug from outlet.

Summary of Contents for HCR3






























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands