HappyJapan HCD2-1501-40, Maintenance Manual

Page: 6 / 198

6
Index
Page
5 Parts Replacement in control box and setting
5-1-1 Remove control box 103
5-1-2 Remove LCD-CE board 104
5-1-2a 10.4” Remove LCD-CE board 105a
5-1-3 Setting for LCD-CE board 106
6 Exchange and setting of Inverter
6-1 Exchange Inverter
6-1-1 Remove Inverter 107
6-1-2 Inverter Installation 109
6-2 Setting of inverter
6-2-1 How to set inverter 112
6-2-2 Initialization of parameter 114
7 Program update procedure 115
7-1 Preparation for program update 116
7-2 Machine program update 117
7-3 Main program update 119
7-3a Main program update 120
7-4 Setting of revolution 121
Re-Initialization of machine system
I nitializing of machine speed
8 Maintenance mode 122
8-1 How to enter Maintenance mode 122
8-2 Machine Test Machine movement 123
8-3 Memory All Clear Initialization of design memory 125
8-4 Record Opereration data display 126
8-4-1 Total number of stitch 126
8-4-2 Record of Error occurrence 127
8-4-3 Number of occurrence in each error display 128
8-4-4 Thread break history 129
8-5 Machine setting 130
8-6 Frame Position Entry Registration of coordinates for positioning sensor. 132
8-7 Maintenance Register
―
Registration of machine maintenance date 133a
8-8 Machine Setting Navigation after exchanging CONT board (Main program Ver.*1.34~) 133b