HappyJapan HCD2-1501-40, Maintenance Manual

Page: 118 / 198

114
6-2-2 Initialization of parameter
Please note that you are unable to make this setting while the machine is running.
When setting is mistakenly made in mid way, the setting will return to parameter in normal standard in one action.
Thereafter please change to parameter you want to set.
1. Enable parameter to be changed by referring 1. to 5. in [How to set inverter].
2.
Press
PRG/RESET.
[ I.F _ _ ] is displayed.
3. Select [ I.H _ _ ] by pressing Down key 3 times.
4.
Press
FUNC/DATA.
[ H 0 3 ] is displayed.
5.
Press FUNC/DATA
again.
[ 0 ] is displayed.
6
Press Up key while pressing STOP.
[ 1 ] is displayed.
7.
Press
FUNC/DATA.
After [ S A V E ] is displayed,
[ H 0 4 ] is displayed.
The settings of inverter become initial settings.
Then, change parameter and return to prohibition setting by referring to the previous clause.