![background image](http://html1.mh-extra.com/html/happ/40/40_installation-and-operation-manual_3754666009.webp)
HAPP 40
© 2013 HAPP Australia Pty Ltd
Version 8
9
|
P a g e
Operation
•
Lift operation by authorized personnel over 18 years only.
•
Apply the parking brake after positioning the vehicle on the lift.
•
Do not allow anyone to stay in lift area during raising and lowering cycles.
•
Closely watch the vehicle and the lift during raising and lowering cycles.
•
Observe the rated load capacity and load distribution.
•
Do not allow anyone to climb on lift or stay inside vehicle
•
After raising the vehicle briefly, stop and check adapters for secure contact.
•
Once the disk adapters contact the lift points, operators should check arm
restraints for engagement.
•
Make sure the vehicle doors are closed during raising and lowering cycles
Hoist Operating Procedures
This product is designed to raise vehicles only for the purpose of examination, repairs and
maintenance.
Pre operation checks
Operator:
Ensure you have read and understood all manuals and safety procedures.
Ensure any maintenance and repairs have been completed and signed off.
Equipment:
Check:
•
All
fittings for tightness
•
Anchor bolts are tight
•
Foundations are visibly sound
•
Safety release mechanisms are functional
•
Cables are sound, tensioned and not frayed, rusted
•
Electrical cords are sound
•
Pads are not damaged
•
Arm locks are functional
•
For visible structural defects
•
Check limit switch operation (motor switches of when safety bar moves limit switch)