HAPP 40
© 2013 HAPP Australia Pty Ltd
Version 8
8
|
P a g e
Safety Notice Points
ⅰ
. Operators should read the manual carefully to avoid accidents.
ⅱ
. Operators should be familiar with all functions and operating methods of the lift.
ⅲ
. Check before operating and regular check must be carried out.
ⅳ
. If there is any abnormal sound during rising and lowering, stop using the lift.
ⅴ
. Never use the lift to raise a vehicle whose weight is above 4ton.
Workplace Health and Safety (WH&S) Design registration and
operation
This hoist is able to be operated in workplaces within Australia and New Zealand AFTER
REGISTRATION by HAPP. Operation of a hoist in accordance with WH&S is the responsibility of
the owner and operator. HAPP believe this starts with the installation of the design registered
hoist and is dependent on regular training of operators and regular maintenance by the workshop.
These procedures are to be documented by the owner and operators of the hoist. HAPP provide
documents of the hoist as part of a WH&S pack which includes the formal design registration
documents and documents that can be used to record the operation and maintenance of the
hoist. These documents are important as a base for documenting the regular training and
maintenance by workshop personnel.
To use this hoist in a workplace contact HAPP for the WH&S registration kit, you will need your
serial number of the hoist. Only hoist owners that have the official HAPP company signed and
sealed approval are considered WH&S approved by HAPP.
Warranty
HAPP Australia Pty Ltd warrant products against faulty workmanship or defective
materials for one year after date of purchase. Warranties are on a parts only basis
and do not include labour.
Problems due to Improper installation, storage, lack of maintenance, lack of
lubrication, incorrect operation, fair wear and tear are not covered in your warranty.
To claim warranty: Email pictures of item and text description to [email protected]
with claim details, we will advise if parts need to be sent to us. In order to advise
production of a fault or defect we must supply pictures and text. You must send
pictures and details to us to receive warranty components.
Parts are sent to HAPP for verification of fault and subsequent exchange,
replacement parts will be sent after verification.
