HAPP 40
© 2013 HAPP Australia Pty Ltd
Version 8
5
|
P a g e
Introduction
In this manual, contents about safety should be paid special attention. Here are
some signals used in this manual.
If there is this signal before any passage, it means that
operation like this is wrong and will lead to big casualty or
heavy damage to the device.
The figure appearing before passage shows that it is not allowed to operate according
to the passage, or the potential risk will develop into big casualty and heavy damage
to the lift.
The passage besides this signal lists the notice points and security
●
The buyer should claim the compensation from the carrier if any damage happens
to the equipment during shipping.
●
Though we have taken the safety into consideration during designation and
produce, some training is required before operating the hoist. Without reading this
manual, do not operate or maintain the lift.
●
Customers should register the hoist with HAPP and use the designated operations
and maintenance log books provided with the HAPP WH&S registration kit.
●Read the requirement for power source and electric current on the nameplate of
motor, and make sure that the power is connected by a specialized electrician.
●
The manufacturer is not responsible for giving notice of any further change on
partial structure of the lift after selling the lift.
●
This hoist is rated at 4 T capacity any vehicle whose weight is above 4000kg is not
allowed to be raised on this machine.
●
Before operation of the hoist,
1. Perform pre operation checks as designated on the hoist
2. Read the warning labels on the equipment carefully.
3. Update any log books required
