HAPP 40
© 2013 HAPP Australia Pty Ltd
Version 8
38
|
P a g e
Figure 1. Plum line for column installation.
7. Stand the other post into position but DO NOT fix it in place, this way the
column can be moved to enable hoses and cables to be fixed more easily.
8.
Check the ram (cylinder) position.
The ram should be located onto a pin at
the bottom of the column and be cantered within the carriage. If it has shifted
during transport relocate the ram onto the pin.
9.
Check the chain alignment.
The chain should be laid over the lifting pulley
evenly and centered.
10. If you have a clear floor hoist,
connect the top cross bar
. If there is concern
at the column moving you may elect to place some stabilizing weights onto the
base plate to hold in in place or put in two anchor bolts after measuring correct
distances apart for cross bar and confirming the column is plum.
11.
Lay out and connect the hoses
connecting the two rams together.