Wagenbouw HAPERT
31
Lubricating the overrun system:
Lubricate the grease nipples with grease (see figure 14) and the sliding parts with oil.
3.4
C
LEANING
The trailer may be hosed down with water. We recommend that you do so if the trailer
has been in contact with salt (brine) or acids, as the zinc coating can be permanently
damaged by such substances. For new vehicles of which the zinc coating has not yet
fully hardened, white spots (white rust) or black spots may appear if the trailer is not
cleaned frequently enough. However, the
protective effect
of the zinc coating is not
reduced by the spots. To try to prevent these spots on hot-dip galvanised components,
you can take measures to ensure there is sufficient air circulation during storage, so no
water film develops between the metal surfaces.
Always make sure the electrical components do not come into contact with water or
other liquids!
Handbrake Grease nipples
Ball coupling Safety cable Figure 14
Summary of Contents for COBALT HB
Page 4: ...Wagenbouw HAPERT 4...
