Wagenbouw HAPERT
29
6. Lock the side flap or the rear flap.
Make sure the drive-on ramp is secured (only for type INDIGO HT and
INDIGO LT).
7. Use the two locking pins to secure the cargo bed to the chassis (only for type
COBALT HM and ) or lock the cargo bed to the chassis (only for type
INDIGO HT and INDIGO LT).
8. Raise the support wheel.
3.3
M
AINTENANCE
Warning!
When working under the cargo bed:
Always support the cargo bed!
Maintenance by the user/service personnel
Wheel attachment:
After the first journey, check whether the wheel bolts are still sufficiently tightened. If
necessary, retighten them. Use the tightening torques table in the Specifications
chapter (5.1.1) to find the correct torque. Check the bolts every time a wheel has
been loosened, for example, to change a tyre (tighten the wheel bolts crossways).
Check the plug and the lights (dirt, corrosion and damage).
Check the tyres (tyre pressure, wear and damage).
Ball coupling:
Regularly clean and grease all sliding surfaces and bearing points.
Figure 12
Rotary button
Emergency pump lever
Summary of Contents for COBALT HB
Page 4: ...Wagenbouw HAPERT 4...
