Wagenbouw HAPERT
18
3.1.1
R
EMOTE CONTROL SYSTEM
/H
APERT REMOTE CONTROL
(
OPTIONAL
)
The remote control system (see figure 3) is fitted during manufacture. The remote
control system works with a hold-to-run system, meaning that raising or lowering stops
as soon as the control button is released.
3.1.2
U
SING THE REMOTE CONTROL SYSTEM
Observe the safety regulations (see 2.2).
Use the main power switch’s red key to turn on the system. By turning the key
clockwise, the electrical system is switched on. (See figure 1) Before using the remote
control (see figure 3), the on/off button on the control panel (see figure 2) needs to be
pressed 2 times. Now the remote control is ready for use (operation with the control
panel is no longer possible in this position).
To raise the cargo bed: keep the raise button on the remote control pressed until
the desired height is reached.
To lower the cargo bed: keep the lower button on the remote control pressed
until the cargo bed is back in its rest position.
Use the key of the main power switch to turn off the entire system by turning it
anti-clockwise, then remove the key from the main power switch.
Figure 1.
Summary of Contents for COBALT HB
Page 4: ...Wagenbouw HAPERT 4...
