Wagenbouw HAPERT
28
Warning!
Before tipping, always check that:
- The load is no longer secured.
For type COBALT HM and :
- The correct two locking pins are in place.
- The correct side flap or the rear flap is unlocked.
For types COBALT HB and INDIGO HT and INDIGO LT:
- The rear flap is unlocked.
5.0 Tipping using the hand pump:
To tip the cargo bed: place the hand pump’s valve in the “raise” position and use the
pump lever to pump until the desired height is reached.
To lower the cargo bed: place the hand pump’s valve in the “lower” position until the
cargo bed touches the chassis and then place the valve back in the “raise” position.
5.1 Electric tipping:
Use the key of the main power switch to turn on the system. (See figure 1) Turn the key
clockwise to activate the electrical system. The on/off button on the control panel needs
to be pressed 1 time to activate the control panel. To raise the cargo bed: keep the
relevant button on the control panel (see figure 2) pressed until the desired height is
reached.
To lower the cargo bed: keep the relevant button on the control panel pressed until the
cargo bed has returned to its rest position.
Turn the system off using the key in the main switch - turn the key to the left and
remove it!
See 3.1.1 and 3.1.2 for electric tipping using the remote control.
5.2 Electric tipping in combination with an emergency pump:
Electric operation:
See “
Electric tipping
” for additional operating instructions.
Emergency pump operation:
To tip the cargo bed: use the pump lever to pump until
the desired height is reached.
To lower the cargo bed: rotate the button until the cargo
bed rests on the chassis.
After the cargo bed has been lowered, place the rotary
button back in the “raise” position.
(Rotate closed/see figure 12)
Summary of Contents for COBALT HB
Page 4: ...Wagenbouw HAPERT 4...
