HAPERT COBALT HB, Manual

Page: 23 / 45

Wagenbouw HAPERT
23
Unladen weight:
The weight of the trailer when ready to be used, i.e. with spare
parts and tools that are normally included, but without a load.
Load capacity:
The maximum permitted load weight.
Weight distribution:
To ensure the brakes work properly and to have good road handling, the centre of
gravity must be as close as possible to the axle.

Heavy objects must be placed as much as possible above the axle.

Lighter objects should be distributed evenly across the cargo bed.

The load should be divided over the right-hand and left-hand halves of the trailer as
evenly as possible.

Avoid point loads.

The load must always be properly secured. Each country has its own regulations.
Make sure the trailer meets the applicable requirements.

When loading and unloading the trailer, it must always be connected to the towing
vehicle.
Figure 6
Maximum support wheel load:
The maximum static load for a sliding support wheel is 150 kg. The maximum static
load for a foldable support wheel is 250 kg. The maximum load must not be exceeded.

Attention!
The trailer has been designed, constructed and tested for the loads
shown in the accompanying documents and on the type
plate/construction plate attached to the front of the trailer. Overloading
the trailer can result in permanent damage, for which the manufacturer
accepts no liability.