(12)
Haojue VS125 99011H7H021H000 V02 EN 2021-4-7 15:11
right turn signal indicator light will flicker accordingly.
NOTE: If the turn signal fails to work due to a broken bulb
or faulty wire connection, the indicator on the dashboard
will remain light up continuously or flicker at a high
frequency.
POSITION INDICATOR LIGHT
6
6
The position light indicator will light up when the position
light is turned on.
FUEL GAUGE
7
$
When the pointer (1) reaches the
red mark (2), there is about 1.4L fuel
left in the fuel tank. You must refill as
soon as possible. When the pointer
reaches “F”, the fuel tank is full.
NOTE: The level indicated by the fuel gauge may
change during frequent ignition switch operation, urgent
acceleration or deceleration, motorcycle incline or uphill
or downhill riding. This is normal.
NOTE: When the motorcycle is held upright, turn the
ignition switch to the “
*
” position, don’t start the engine,
the fuel gauge will indicate correctly.
LEFT HANDLE SWITCHES
REAR BRAKE LEVER
1
To brake rear wheel, grip this brake lever towards the
handlebar, the brake light on at the time.
DIMMER SWITCH
2
“
'
” position
The headlight low beam and taillight will light up.
“
9
” position
The headlight high beam and taillight will light up. The
high beam indicator on the dashboard will also be lit.
B
CAUTION
Holding the dimmer switch between “
9
” and “
'
”
position will turn on both “
9
” and “
'
” headlight
beams. This operation can damage the motorcycle.
Use the dimmer switch only at “
9
” and “
'
”
position.
Do not stick tape on the headlight or
place objects in front of the headlight.
TURNING SIGNAL SWITCH
3
= 8
Moving the switch to the “
=
” position will engage the
left turn signals. Moving the switch to the “
8
” position
will engage the right turn signals. The indicator on the
dashboard will also flash. To cancel turn signal operation,
push the switch inward.
(12)
Haojue VS125 99011H7H021H000 V02 EN 2021-4-7 15:11
11
