Haojue VS125 99011H7H021H000 V02 EN 2021-4-7 15:11
(31)
B
CAUTION
If riding in dusty conditions or in moist conditions,
make the inspection and replacement intervals
for the air filter element shorter; if it is found
that the air filter element is blocked, damaged or
non-dustproof, the engine power has dramatically
declined or the fuel consumption has increased, do
not solve the problem during the next maintenance
but immediately change the air filter element. If the
engine is started when there is no air filter element,
it will wear seriously. Check the condition of the air
filter element frequently because this component
usually has an impact on engine life.
OIL COLLECTING PIPES
After the air filter is inspected, inspect the oil collection of
the oil collecting pipes at its lower part. If there is liquid in
the oil collecting pipes, drain it promptly with the method
below.
Front lower oil collecting pipe
1. Remove the oil collecting pipe
2
from the fixing clip
1
.
2. Loosen the clamp
3
and move
it up.
3. Pull out the oil collecting pipe
plug
4
from the oil collecting pipe
2
.
4. Drain the waste liquid in the oil collecting pipe
2
.
5. After the fuel is drain out, insert the plug
4
into the oil
collecting pipe
2
and loosen the clamp
3
and move
it down to clamp the plug
4
.
6. Get the oil collecting pipe
2
stuck in the fixing clip
1
.
NOTE: Be true that reinstall the collecting pipe plug.
NOTE: When air is very humid, properly increase the
inspection frequency.
Rear lower oil collecting pipe
1. Loosen the clamp
2
.
2. Remove the oil collecting pipe
1
together with the clamp
2
.
3. Drain all the waste liquid in the
oil collecting pipe
1
.
4. Reinstall the oil collecting pipe
1
and fasten the clamp
2
.
NOTE: Be true that reinstall the collecting pipe.
NOTE: When air is very humid, properly increase the
inspection frequency.
SPARK PLUG
Spark plug inspection
0.6–0.7 mm
Measure the spark plug gap with a thickness gauge. The
30
Haojue VS125 99011H7H021H000 V02 EN 2021-4-7 15:11
(31)
