Haojue VS125 99011H7H021H000 V02 EN 2021-4-7 15:11
(21)
Throttle opening
When the engine is cold
1. Grasp the front or rear brake
lever.
2. When the throttle grip is on
its original position, open the
throttle to 1/8 of its limit when
necessary.
3. Press the electric startup button “
#
” or tread on the
kick lever (omit the first step in the case of the kick
lever).
4. Keep the engine running until fully warmed up after
startup.
B
CAUTION
The sufficient preheating of a cold engine after
start up can provide the necessary conditions for
the normal running of the engine. If the engine
is not sufficiently preheated, and if the motorcycle
travels repeatedly for only a few kilometers each
time, normal engine performance will be affected
and the service life of the engine oil will be
shortened. When the temperature is low, sufficient
preheating of the engine is even more important.
NOTE: The colder the weather, the longer preheating
time the engine needs. Riding after the engine is fully
preheated will cause the engine to suffer less wear.
When the engine is warm
1. Grasp the front or rear brake lever.
2. The throttle grip is on its original position.
3. Push the electric startup button “
#
” or tread on the
kick lever (Omit the first step in the case of the kick
lever).
B
WARNING
Exhaust
gas
contains
carbon
monoxide,
a
dangerous gas that is difficult to defect because
it is colorless and odorless.
Breathing carbon
monoxide can cause death or severe injury. Never
start the engine or let it run indoors or where there
is a little or no ventilation.
B
WARNING
Do not start the engine in a poorly-ventilated place
or a room without ventilation devices because the
waste gas discharged by the engine is toxic. When
nobody is around to attend to the engine, do not
have it running.
B
WARNING
Do not start the motorcycle when the fuel or engine
oil is insufficient.
B
WARNING
Do not use the electric start function and the kick
lever function at the same time.
20
Haojue VS125 99011H7H021H000 V02 EN 2021-4-7 15:11
(21)
