Haojue VS125 99011H7H021H000 V02 EN 2021-4-7 15:11
(41)
B
WARNING
After a new brake disc or pad is installed, the
braking distance may be a little longer than the
original value.
After the brake discs and brake
pads have realized full break-in following a mileage
of about 300 km, the best braking effect will be
realized.
Make sure there is an enough braking
distance when riding before that.
B
WARNING
Fail to inspect and maintain the brakes pads or
brake disc, and replace them when recommended
can increase your chance of having an accident.
If you need to replace brake disc or brake pads,
have your Haojue dealer do these works. Inspect
and maintain the brake disc and brake pads as
recommended.
REAR BRAKE (DRUM BRAKE)
Adjustment of rear brake lever
Free stroke
1
of the rear brake lever refers to the stroke
between the lever’s free position and the lever’s position
when the lever is grasped on to brake the rear wheel. The
adjusting steps are as follows.
1. Turn the adjusting nut
2
on the brake.
Turn it
clockwise for a smaller free stroke, or anticlockwise
for a larger one. Make the free stroke
1
20–30 mm.
2. After adjustment, checking, when the tire do not
connect the floor, turn around the wheel, have not
friction feeling. When grasping the lever, the distant
between the lever and handlebar is enough.
NOTE: If follow the steps, the free stoke is not required,
please have it checked by the authorized dealer.
The mark
extending line is in
the allowed range
Wear limit of rear brake
There is a wear limit mark on
the rear brake of the motorcycle.
Inspect the wear situation of the
rear brake following the essentials
below.
1. Inspect
whether the braking
system
has
been
properly
adjusted.
2. Operate the braking system and inspect and make
sure the mark extending line
1
is in the allowed range
3
(see the figure) marked on the wear limit mark
2
, otherwise have the component in the rear brake
replaced by a qualified distribution and maintenance
organization for safety.
40
Haojue VS125 99011H7H021H000 V02 EN 2021-4-7 15:11
(41)
