After finishing Function Setup 2, please touch
button to display Function Setup 3 screen.
You can adjust LCD brightness by
, button in the Function Setup 3.
42
FUZZY
FUNC
BOOT RUN
BEEP
TOUCH PNL.
SCREEN
P.DOWN
It happens that measurement value is more than setting value in initial
Over Shoot, select Fuzzy control.
According to the load controlling Over shoot, the rising time can be delayed or
Under Shoot can become larger in some cases.
Program control
STOP
Start to operate again from the beginning
Start to operate from segment before outage
Turn on/off the buzzer sound to check various input and operation.
It is used to limit the touch panel input during system control operating. Selecting Lock, it is
impossible to input except
, and
/ buttons.
As it is the function to turn off the power of Back-Light after the setting time in order to
protect the LCD display, it can set up Setting time as a unit per a minute. Setting 0 when it is
not used, it is turning on all the time.
STOP
COLD
HOT
Fixed control
STOP
Start running in accordance with
the set value before outage.
5.1.3 Function setup 3
Press
button in Function setting menu screen[Fig. 44] Program setup menu will be
shown. It is composed of 5 buttons. Push each button to set up under an item.
5.2 Program setting
[Fig.43] Function setup 3 screen
th300_500_통합본_th300_500_통합본.qxp 19. 6. 26. 오후 1:34 페이지 42
Summary of Contents for TH500A
Page 1: ......
