54
When pressing pattern name in the Program Pattern Name setting screen [Fig.65], Number Input
Screen[Fig.66] will be shown. When pressing
button in the function setting menu,
Program setup menu screen will be shown. Pressing
leads to Program pattern name
screen. When pressing the Program pattern name you want by means of right-upper side
button, Number input screen[Fig.66] will be shown. Enter the desired pattern number by
button.
5.2.7 Program pattern name setting
5.2.8 Pattern/Segment management
[Fig.66] Number input screen
[Fig.65] Program pattern name screen
[Fig.67] Pattern/Segment management
[Fig.67] is the display for managing patterns through pattern copy, segment copy and segment
initializing. In the left side you should enter the source pattern or segment number used for pattern
management. In the right side you should enter the target pattern number of segment number to be
copied. After entering a desired value, you can copy it
by pressing
, button in arrow.
button on the left center is used for
initializing all the internal segments of the pattern
entered into the input box above. Pressing
,
it will be copied to contents related with every
segment in internal pattern. Pressing [Fig.67] Segment
management
button, it will copy contents of
the original start/End segment copy from a copy start
segment. It is possible to copy segment into your
desired position by inserting different segment numbers of the right copy when copying segment.
(Example : the original 1~6 to the copy 7~12)
th300_500_통합본_th300_500_통합본.qxp 19. 6. 26. 오후 1:35 페이지 54
Summary of Contents for TH500A
Page 1: ......
