After finishing the setting of Function setup 1, press
button to set up the setting item of Function setup 2.
In case outage occurs in working, it will be different with Operation condition in recovering outage by selecting
BOOT RUN of Function setup 2 screen. (only the power recovers within five seconds after outage, the same
condition as before will be kept up.
5.1.2 Function setup 2
41
Pushing
button in [Fig.40]Function setting menu screen, you should select or set
up each setting item of the function setup 1. Choose between Select Program control and Fixed
control in selecting Working method.
5.1 Operation setting
5.1.1 Function setup 1
[Fig.41] Function setup 1 screen
RUN MODE
T.SV RATE
H.SV RATE
Fix RUN TIME
ZN. TRACKING
PROGRAM
FIX RUN
Select in program control
Select in fixed control
Set it up as the gradient of temperature variations [℃/m] per hour (minute) from
current temperature to setting temperature in fixed control.
Set it up as the gradient of temperature variations [℃/m] per hour (minute) from
current temperature to setting temperature in fixed control.
After executing the fixed-mode control for the time entered, the operation will stop automatically.
It prevents rapid output change when P.I.D ZONE is changed.
[Fig.42] Function setup 2 screen
th300_500_통합본_th300_500_통합본.qxp 19. 6. 26. 오후 1:34 페이지 41
Summary of Contents for TH500A
Page 1: ......
