overview
8_
overview
Internal composition (lower part of the mount)
c
a
e
d
b
Item
Description
a
GND Terminal
Used to discharge a lighting or a surge current outside in order to protect a camera from it
safely.
b
Safety wire
Cable to prevent accidents when installing cameras by connecting it to the upper part of the
mount.
c
Audio/Alarm port
Plug in the audio and alarm cables to use an external alarm device, microphone and
speaker.
d
Power port (DC 12V)
Plug in two power cables with the included power terminal block. Only for DC 12V.
e
PoE+ port
Plug in a PoE+ or network cable for power and network connection.
Internal composition (camera bottom)
a
b
c
d
Item
Description
a
Zoom/Focus Control Button
T
Zoom in (Tele)
W
Zoom out (Wide)
N
Focus on a near object (Near)
F
Focus on a far object (Far)
AF
Press this button for automatic focus control.
b
MICRO USB port
Port to connect the WiFi dongle.
You can check the installation video through the application installed on a smartphone.
Refer to “
Connect to WiFi dongle
” on page 15.
`
Wifi dongle and OTG adapter are sold separately.
c
Reset Button
Used to restore all camera settings to the factory default.
Press and hold for about 5 seconds and it reboots the system and restores the factory
default.
J
If you reset the camera, the network settings will be adjusted so that DHCP can be
enabled. If there is no DHCP server in the network, you must run the Device Manager
program to change the basic network settings such as IP address, Subnet mask,
Gateway, etc., before you can connect to the network.
d
Micro SD card slot
Slot for inserting a Micro SD card. Two Micro SD cards are available.
