installation & connection
14_
installation & connection
Removing a Micro SD card
Gently press down the exposed end of the Micro SD card to eject it from the slot.
J
`
Before removing the Micro SD card, in <
Setup (
)
>-<
Event
>-<
Storage
>, set the device to <
Off
> and press the [
Apply
]
button and turn the camera off.
`
If the micro SD card is removed or the power is turned off while data is being saved to the micro SD card, the data may be lost
or corrupted.
CONNECTING WITH OTHER DEVICE
Grounding cable
Wi-Fi dongle
Power
PoE+ Router
J
`
The Micro USB port is used to connect a Wi-Fi dongle to communicate a smartphone installed the applications.
`
Smartphone videos which use the WiFi dongle output <
CH1: Visible
> or <
CH2: Thermal
> video of the camera. These
videos are intended to provide convenience for camera installation and are not suitable for surveillance.
`
Whenever there is a change in the ambient temperature or a specific interval is reached, the thermal video in use will
temporarily freeze for about 1-2 seconds. This phenomenon is a normal operation for calibrating the thermal video.
