Hanway XRAY125S 2019, Operation Manual

Page: 16 / 43

Functions of Controllers
13
Please do turn off the lamps when they are no longer necessary,
otherwise you may cause trouble to people in front of or behind you.
③
Horn Button
Press this button to sound the horn.
④
High Beam Flash Button
Press this button to light the high beam temporarily.
⑤
Clutch Lever
Grip this lever to disengage the driving system at the time of starting
the engine or shifting the gear. Disengage the clutch by grasping the lever.
⑥
Stop Switch of Engine
This switch, located on the top of the control panel of the right
handlebar, is of swinging plate type. Its shaft is placed on the center of the
plate. When it is on the “ ” position, the engine can be started.
If the switch is on the “ ” position, the short circuit will be formed
for ignition coil, so the engine cannot be started.
⑦
Starter Button
This button is used to start the engine. Turn the ignition key to ON,
squeeze the rear brake lever and press the button, the engine will be started
immediately.
⑧
Brake Levers
By operating the brake levers
⑧
, you can control the speed of the
motorcycle and even make it stop. The brake is applied by squeezing the
brake lever gently towards the grip. The brake light will be lit when the
lever is squeezed inward.
⑨
Throttle Grip
⑥
⑦
⑧
⑨