Hanway XRAY125S 2019, Operation Manual

Page: 28 / 43

Inspection and Maintenance
25
Inspection and Maintenance
The maintenance schedule indicates the intervals between periodic
services in kilometers and months. At the end of each interval, be sure to
inspect, check, lubricate and service as instructed. If your motorcycle is
used under heavy load conditions such as continuous full throttle operation
or is operated in a dusty climate, certain services should be performed more
often to ensure reliability of the machine as explained in the maintenance
section. The dealer can provide you with further guidelines. Steering
components, suspensions and wheel components are key items and require
very special and careful servicing. For maximum safety we suggest that
you have these items inspected and serviced by your dealer or a qualified
service mechanic.
The first maintenance
The maintenance after first 600miles (1000 km) is the most important.
During running in, all engine parts have been fitted each other, together
with other parts. Then, all parts should be readjusted; all fasteners retighten
and contaminated engine oil replaced.
To guarantee the engine with a long service life and a good
performance, carry out the 600miles (1000 km) maintenance timely.
Caution
You may replace some components when you maintain your
motorcycle. We suggest you use genuine replacement parts or their
equivalent. If you are an expert or a do-it-yourself mechanic, we
recommends that those items on the maintenance schedule marked with an
asterisk (*), be performed by authorized the dealer or qualified service
mechanic. You may perform the unmarked items easily by referring to the
instructions in this section.