Hanway XRAY125S 2019, Operation Manual

Page: 36 / 43

Inspection and Maintenance
33
Caution
Make sure there is no leakage in the circuit and check that the hoses
and the unions are not damaged and also they should not be twisted.
Warning
The adjustment of the brake pump has been done at the factory; if
necessary, go to your nearest Dealer. It is forbidden to change these
adjustments, because it can seriously damage the brake system.
Caution
The brake circuit fluid is highly corrosive, avoid contact with the
body, painted parts and and/or any plastic parts.
Warning
The brake circuit fluid is hygroscopic (it absorbs the moisture). If the
moisture of the brake fluid is higher than its specified value, the brakes will
not work properly.
Under normal weather conditions, the brake fluid must be replaced
every 2 years. For this operation which needs an special care, go to your
nearest dealer.
Fuel Hose
Replace the fuel hoses every four years.
Fuse
The fuse is located next to the battery. If there is any electrical system
failure, first check the fuse. In the case the fuse blows, there is a 10A spare
fuse.
Caution
Always be sure to replace the blown fuse with the correct amperage
fuse. Never use substitute, for example aluminum foil or wire, to replace a
blown fuse. If the spare fuse installed blows in a short period of time, it
means that you could have a major electrical problem. You should consult
the dealer or a qualified service mechanic immediately.