10
-
23
Hanskamp AgroTech B.V. (the Netherlands)
www.hanskamp.nl/en
Dump
EN
Carrousel voersysteem—Carousel feeding system—Karussel
-
Fütterungssystem—Système d
’
alimentation carrousel
6.
Depending on the number of feed types, the Dump should be fitted with a cover
plate. Use art. no.: 011
-
161
-
000 for one type of feed, and art. no.: 011
-
162
-
000 for
two types of feed. Secure the cover plate with blind rivets (Art. no.: 001
-
951
-
000).
(Fig. 7). The edges can be finished with kit to block dust.
Warning! Always install a drop tube of at least 85 cm or shield off the cutting
hazard in another way.
7.
Mount the Dump to a wall or a frame with the PipeFeeder clamps (Art. no.: 001
-
902
-
000). For safety reasons, ensure that the Dump is mounted at least 80 cm
above the feed trough. (Fig. 8)
Note: Wall
-
mounting hardware not provided.
8.
Mount the PipeFeeder HighSpeed above the Dump. The top of the Dump has slots
into which the PipeFeeder HighSpeed fits. A slot has been laser cut into the
bottom of the PipeFeeder HighSpeed. The slot is used to position the PipeFeeder
correctly, to prevent the PipeFeeders from dispensing into each other when using
two types of feed. (Fig. 9 & 10).
9
7
011
-
161
-
000
011
-
162
-
000
8
001
-
902
-
000
10
