Operation
Page EN-17
Operation
0000
Before getting started
• Read chapter “Safety” on page EN-4 and
all the safety notices.
• Install the exhaust hood as described in
chapter “Assembly” on page EN-12.
1200
(16) (17) (18)
(22)
(21)
(20)
(19)
Switching the appliance on
and off
• To switch the appliance on, touch the sen-
sor (16) . An audible signal will sound;
the colour on the display will change to
blue.
• To switch the appliance off, touch the
sensor (16) again. An audible signal
will sound; the colour on the display will
change to white.
Setting the time
When the appliance is first connected to the
mains, the time displayed is
12:00
.
To change Central European Time
(CET) to daylight savings time, you
need to manually set the clock forward
at the end of March and back again at
the end of October.
1. Switch on the appliance as described in
the chapter “Switching the appliance on
and off” on page EN-17.
2. Touch and hold the sensor (17) for
about three seconds. An audible signal will
sound; the display
12
will start to flash.
3. Use the sensors (20) and (21) to set
the hour.
4. Touch the sensor (17) again. An audible
signal will sound; the display
00
will start
to flash.
5. Use the sensor (20) to set the minutes.
6. Touch the sensor (17) or the sensor
(16) again to finish setting the time.
Switching on the fan
The fan has three settings: (20) low, (21)
medium and (22) high.
• To switch the fan on, touch the sensor for
the desired setting. An audible signal
will sound; the colour on the display will
change to blue.
Changing the fan setting
• To change the fan setting, touch the sen-
sor for the (other) desired setting. An au-
dible signal will sound; the colour on the
display will change to blue.