Materials required for assembly
Page 13
8. Carefully attach the exhaust hood to the
hangers (7) using the two outer fixing
screws.
9. Screw in two fixing screws and washers
into the inner wall plugs and tighten.
[
(3)
(1)
(4)
10. Tighten outer fixing screws. The exhaust
hood is now mounted to the wall.
11.
Only for exhaust air operation:
Place
the check valve (3)on top of the exhaust
hood (1) and screw tight (4) using four
plate screws.
This step is omitted if the appliance is
used in circulation air operation.
12. If the exhaust hood is being installed be-
neath a cupboard: mark the air outlet for
the exhaust air hose (2) on the bottom of
the cabinet and saw the opening into the
cabinet. To do this
13. drill a hole inside the circle using a wood
drill;
14. cut out the circle from there using a jig-
saw;
15. smooth the edges with sandpaper.
(6)
(2)
(3)
16. Attach the exhaust hose (2) with the
153 mm diameter opening (see marking
on the exhaust air hose) to the exhaust
opening (6)of the check (3) valve.
17. Attach the exhaust air hose opening with
a diameter of 150 mm (see marking on
the hose) to the wall/ceiling outlet.
18. Establish a connection with the power
supply.
