Hanse 350, Owners & Safety Manual, Page: 43 / 53

H a n s e 3 5 0
39
4.6. Repairs
Repairs on the hull, drive systems, rigging and sails should be performed by a specialist
company, because they have the required technical equipment and special knowledge of how to
return to you a high quality boat after a repair. This applies to damages of the structure, in
particular.
Our shipyard will support you and can name specialist companies able to perform expertly
repairs.
4.7. Inspection of units and systems
The reliable functioning of the individual systems is important for save operation the boat. Check
equipment and systems regularly for their operational readiness. For this purpose, use the
manual and/or the enclosed operating instructions.
Appropriate measures must be taken to prevent damages to the fuel conduits.
Prevent inflammable materials or liquids from coming in contact
with hot parts of the engine!
Equipment that contains petrol may not be stored in areas that are
not meant for it!
4.8. Winter storage
Winter storage is the time during which your boat is left unattended for a longer time. During this
period it must stand securely and should be stored in a place protecting it from atmospheric
effects.
Please read section 2.1 Transport, craning, slipping.
Dispose of all waste.
Remove all sophisticated equipment from the boat. Cushions should be stored in dry, ventilated
and frost-free places.
If the boat is covered by a tarpaulin, you should ensure that the air can circulate well underneath
it. If possible, keep the ventilation apertures of the boat open.
The tarpaulin should be well fixed so that no abrasions cab take place especially the hull.
4.8.1. Hull and deck
Clean the yacht immediately after hauling. High-pressure-cleaner can remove all fouling.
For boats sailing in seawater: remove all rests of salt, because it can speed up the corrosion.
The boat should only be cleaned with fresh water if possible. Environmentally compatible
cleaning agents suitable for FRP and varnished surfaces may be used for persistent dirt.
Special agents are offered for further treatment such as refurbishing and sealing varnished
surfaces. Only use agents suitable for this!
Metallic parts may only be cleaned with metal polish. Please note that aluminium parts are
anodised and must not be treated with scratching or polishing agents.
4.8.2. Rigging
Prior to winter storage, rinse the entire rigging and the sails with ample fresh water. In the winter
storage the rigging should undergo a thorough visual inspection. This includes, in particular, the