Hanse 350, Owners & Safety Manual, Page: 24 / 53

H a n s e 3 5 0
20
Chapter 2 -
Chapter 2 –
Further Technical Details
1. Installations and Systems
1.1. Tank capacities
1 Fuel tankss approx. 110 l The tanks are located underneath the bed in the
aft cabin. They are equipped with an inspection
lids and connecting conduits with valves, as well
as with discharge valves and ventilation.
1 Fresh water tank approx. 240 l The fresh water tank is equipped with an
inspection lid, valves and ventilation. The tank is
located under the bed in the bow.
Black water tanks approx. 30 l The tank is located in the immediate vicinity of the
toilet.
He is permanently installed. The system includes
appropriate valves and deck openings to pump-
out the content on shore and a seacock for direct
discharge into the sea.
1.2. Water systems
1.2.1. Drinking water
The yacht has 1 water tank with a total capacity of approx. 240 l. The tank is provided with an
opening at the top for cleaning.
The filler neck is located on the foredeck.
Before filling, check whether the marking on the filler neck is correct.
The pressure water pump (12 V) draws the water from the tank and feeds cold water to the taps.
A pressure tank ensures steady water pressure in the drinking water system. When taps are
opened, the pump is activated. When they are shut, the pump is switched off by the counter-
pressure.
Should the pump continue to run, the system must be checked for leakage.
If air bubbles come from a water tap, immediately switch off the
corresponding pressure water pump at the distribution fuse panel.
The pumps are safe to run dry for a short period of time. When
running dry for a longer period of time, the pump’s impeller may
be damaged.
2