HANSCRAFT SPATOUCH 3, User Manual

Page: 3 / 36

3
Hot tub performance specifications
1 Hot tub performance specifications
Performance specifications
rated voltage: three-phase connect 230/400 V 50 Hz*
maximum working current: 3× 16 A
current surge: up to 3× 25 A
voltage resistance: 1 250 V/min without breakdown
insulation resistance: >= 1 M Ω
water resistance (protection): IPX5
electrical shock protection: first degree
* The product does not use 400 V phase to phase voltage. It is possible to adjust it to
1× 230 V; however, this is not recommended due to limitation of the functions.
(For more information on this connection, please refer to the Supplements, p. 33)
Load capacity
heating: 1× 230 V/3 kW/13 6 A
ozone: 1× 230 V/50 Hz/80 mA
blower: 1× 230 V/0 66 kW/2 9 A
pump 1/1 + 1/1 + 0,4: 2 2 kW + 2 2 kW + 0 4 kW
total input power (depending on type of hot tub): 8 5 kW / h
protection class:
I
lighting: LED 12 V AC/10 W
maximum output power: 20 W
Preparation and electrical connection options – AC three-phase
current 3× 230/400 V/16 A/20 A
Ensure that the hot tub is always connected to a circuit protected by a Residual Current
protective Device with a rated tripping current of 0.03 A. It is necessary to use a Type C
or Type D circuit breaker with a rated current of 16 A (motor circuit breaker)
downstream of the Residual Current protective Device.
For your own safety and the safety of your product, please observe the following
instructions Read the following information carefully and follow the user manual
exactly when using the hot tub to avoid damaging the product or the risk of injury
This appliance is intended for use by children 8 years of age or older with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
provided they are under supervision or have been instructed on the use of the
product and understand the risks Children must not play with the product
Cleaning and maintenance must not be performed by children without supervision