16
Control panel
Enabling Filter cycle 2
You will fi nd out whether Filter Cycle 2 is enabled by seeing if a white circle appears
around the icon-button with a number 2 . For example, on image III. on the previous
page Filter Cycle 1
is enabled (the number 1 is encircled with a white circle), and
Filter Cycle 2 is disabled
(the number is not encircled in white). By tapping on the
number 2 icon-button
you enable/disable Filter Cycle 2.
Filter Cycle 2 will only run if it is enabled.
NOTE: Filter Cycle 1 and Filter Cycle 2 may overlap, by which the total filtration time
will shorten by the amount of overlap time.
Clean-up cycles
Short-term launch of water fi ltration through secondary devices at the beginning
of every fi lter cycle ensures maintenance of hygienic conditions as well as freeze
protection. Some systems automatically launch a certain number of rinse cycles per
day regardless of the number of fi lter cycles per day that have you set up. In such
cases, the clean-up cycles do not have to coincide with the start times of fi lter cycles
set by you. If Filter Cycle 1 runs on a 24-hour setup, by switching on Filter Cycle 2 you
launch the clean-up at the time when the launch of Filter Cycle 2 is programmed.
Description of fi lter cycles
1 The fi lter pump is always running during a fi lter cycle.
2 In REST mode, heating up only happens during the fi lter cycle.
3 Rinsing (launching of the massage pumps) occurs at the beginning of every fi lter
cycle (in most systems).
spaTouch
™
3 User Guide
42344_Rev D
9
Follow this sequence to set the time-of-day.
•
In the Main screen, press the Settings button (B).
•
In the Settings screen, press the Time button (C).
•
In the Time of Day screen, press the Time button (D).
•
Setting dials appear. Swipe these dials (F) to set
the time. If your desired time value appears but is
not aligned with the arrow, tap the desired time
value to make it align with the arrow.
•
Press the Save button (G) to save your settings. Or,
press the Cancel button (E) to cancel your settings.
Setting the time-of-day is important for determining
filtration times and other background features. If
Time-of-Day needs to be set, the Information Message
button (A) appears on the Main screen; view the
previous page for more information on the different
types of Message buttons.
NOTE: If power is interrupted to the system,
Time-of-Day will be maintained for several days (this
only applies to some systems).
SET THE TIME-OF-DAY
AC
AE
AF
A
D
Be sure to set the
Time-of-Day
AA
AB
A
G
spaTouch
™
3 User Guide
42344_Rev D
9
Follow this sequence to set the time-of-day.
•
In the Main screen, press the Settings button (B).
•
In the Settings screen, press the Time button (C).
•
In the Time of Day screen, press the Time button (D).
•
Setting dials appear. Swipe these dials (F) to set
the time. If your desired time value appears but is
not aligned with the arrow, tap the desired time
value to make it align with the arrow.
•
Press the Save button (G) to save your settings. Or,
press the Cancel button (E) to cancel your settings.
Setting the time-of-day is important for determining
filtration times and other background features. If
Time-of-Day needs to be set, the Information Message
button (A) appears on the Main screen; view the
previous page for more information on the different
types of Message buttons.
NOTE: If power is interrupted to the system,
Time-of-Day will be maintained for several days (this
only applies to some systems).
SET THE TIME-OF-DAY
AC
AE
AF
A
D
Be sure to set the
Time-of-Day
AA
AB
A
G
I
II
Continued on the next page
5 8 Time-of-day settings
Summary of Contents for SPATOUCH 3
Page 1: ...USER MANUAL SPATOUCH 3...
Page 35: ...35 Notes...
