12
Control panel
In circulation systems the ozone will typically run together with the circulation pump,
but it may be limited by fi ltration cycles.
Freeze protection
If the temperature sensors within the heating system register a low temperature, the
pumps and blower will gradually activate to provide freeze protection for the water in
the hot tub.
Clean-up cycle (optional)
When a pump or blower is turned on by tapping the icon-button on the control panel,
the clean-up cycle will begin 30 minutes after the pump or blower is turned Off or
timed out. The pump will run for 30 minutes or longer (depending on the system).
On some control systems, you can change this setting.
5 5 Features of the Hot tub
By tapping on the Spa
icon you will open the Spa screen. By tapping on these
icon-buttons
you will activate the hot tub’s devices. Some devices may only be
switched On or Off while other systems may have diff erent speeds/statuses available.
The confi guration of your hot tub determines the number of icons buttons and icon
features on the Spa screen. A maximum of six icon-buttons is showed at once. If more
than 6 icon-buttons are available, a navigation arrow shows up on the right-hand side
. By tapping this arrow or by swiping your fi nger you will arrive at the next screen
with the remaining feature icon-buttons of the hot tub
. By pressing the Back
icon-button you arrive back at the home screen.
If the jets are left running, they will switch Off after a certain period of time. If the
hot tub is equipped with a circular pump, the icon of the circular pump will show up
on the Spa screen. This icon only indicates its activity and is thus not a functioning
icon-button. If the hot tub doesn’t have a circular pump, Jets 1 may occasionally switch
on automatically. In that case, it is possible to change the speed by repeatedly tapping
this icon-button, however, it is not possible to switch off Jets 1.
spaTouch
™
3 User Guide
42344_Rev D
12
Press the Spa button
(A) to view the Spa screen.
Press these buttons (B) to run spa devices. Some
devises may only turn On and Off, while other
devices may have multiple speeds/states. Your spa
configuration determines the number of buttons and
the function of the buttons in the Spa screen. One Spa
screen displays six buttons, maximum. If more than six
buttons exists, a navigation button appears (D). Press
the navigation button (D), or swipe, to view the next
Spa screen. Press the Back button
(C) to navigate to
the Main screen.
If the Jets are left running, they will turn off after a
time-out period.
If the Spa has a circulation pump, a circulation pump
icon will appear in the Spa screen to indicate its
activity only (the icon is not a functioning button).
The circulation pump can be controlled with a button
during Priming mode (view page 26).
If the spa does not have a circulation pump, then Jets
1 may turn On automatically at times. In these cases,
pressing the Jets 1 button will just change speeds, but
will not turn Off Jets 1.
RUN SPA DEVICES
Main Screen
C
A
Spa Button
B
D
spaTouch
™
3 User Guide
42344_Rev D
12
Press the Spa button
(A) to view the Spa screen.
Press these buttons (B) to run spa devices. Some
devises may only turn On and Off, while other
devices may have multiple speeds/states. Your spa
determines the number of buttons and
the function of the buttons in the Spa screen. One Spa
screen displays six buttons, maximum. If more than six
buttons exists, a navigation button appears (D). Press
the navigation button (D), or swipe, to view the next
Spa screen. Press the Back button
(C) to navigate to
the Main screen.
If the Jets are left running, they will turn off after a
time-out period.
If the Spa has a circulation pump, a circulation pump
icon will appear in the Spa screen to indicate its
activity only (the icon is not a functioning button).
The circulation pump can be controlled with a button
during Priming mode (view page 26).
If the spa does not have a circulation pump, then Jets
1 may turn On automatically at times. In these cases,
pressing the Jets 1 button will just change speeds, but
will not turn Off Jets 1.
RUN SPA DEVICES
Main Screen
C
A
Spa Button
B
D
I
II
Summary of Contents for SPATOUCH 3
Page 1: ...USER MANUAL SPATOUCH 3...
Page 35: ...35 Notes...