HANSCRAFT SPATOUCH 3, User Manual

Page: 13 / 36

13
Control panel
5 6 Settings
Tap the Settings icon-button on the home screen. A menu with a selection of
Settings
icon-buttons will show up. To view the entire selection, tap the navigation
arrows or swipe your fi nger across the display.
Heat
Keep the hot tub heated and ready to enjoy via correct heating settings.
(See chapter 5.9)
Filter
Keep the water in your hot tub clean and ready to enjoy via fi lter cycle settings.
(See chapter 5.7)
Time
By setting the time-of-day, you ensure correct timing of the planned features.
(See chapter 5.8)
Reminders
Reminders that are visible on the screen are useful messages regarding the
maintenance of the hot tub, and they show up regularly.
Locks
Settings lock/panel lock. (See chapter 5.10)
Hold
The Hold function which is visible on the screen
is used to switch off the pumps
during servicing such as cleaning or replacement of the filter. The Hold mode lasts
1 hour unless switched off manually. If servicing requires more than 1 hour, it is
recommended to switch off the hot tub’s power supply instead. You may terminate
Hold Mode by tapping the Back icon-button.
Fine tune your spa with a
wide variety of Settings.
Starting from the Main screen, press the Settings
button
to view the Settings screen (A). Press the
navigation arrows or swipe to view all of the
Settings screens.
Heat
Make sure your spa is heated and ready to enjoy with
Heat Settings. (view page 22).
Filter
Keep your spa water clean and ready to enjoy by
setting Filter Cycles (view page 13).
Time
Set the Time to insure scheduled features have proper
timing (view page 9).
Reminders
Reminders (A) are helpful spa maintenance messages
that display periodically.
Locks
Lock the Panel and/or Setting (view page 15).
Light Cycle
(Optional)
If you want the spa lights to turn On and Off at a
times, use Light Cycle (A).
Hold
Hold (B) is used to disable the pumps during service
functions like cleaning or replacing the
Hold
Mode will last for 1 hour unless the mode is exited
manually. If spa service will require more than an hour,
it may be best to simply shut down power to the spa.
The Hold Icon on the Settings Screen places the spa
in Hold Mode and displays the System Hold screen.
Touch Back to exit Hold Mode.
spaTouch
™
3 User Guide 42344_Rev D 24
SETTINGS SCREEN
AA AB
Fine tune your spa with a
wide variety of Settings.
Starting from the Main screen, press the Settings
button
to view the Settings screen (A). Press the
navigation arrows or swipe to view all of the
Settings screens.
Heat
Make sure your spa is heated and ready to enjoy with
Heat Settings. (view page 22).
Filter
Keep your spa water clean and ready to enjoy by
setting Filter Cycles (view page 13).
Time
Set the Time to insure scheduled features have proper
timing (view page 9).
Reminders
Reminders (A) are helpful spa maintenance messages
that display periodically.
Locks
Lock the Panel and/or Setting (view page 15).
Light Cycle
(Optional)
If you want the spa lights to turn On and Off at a
times, use Light Cycle (A).
Hold
Hold (B) is used to disable the pumps during service
functions like cleaning or replacing the
Hold
Mode will last for 1 hour unless the mode is exited
manually. If spa service will require more than an hour,
it may be best to simply shut down power to the spa.
The Hold Icon on the Settings Screen places the spa
in Hold Mode and displays the System Hold screen.
Touch Back to exit Hold Mode.
spaTouch
™
3 User Guide 42344_Rev D 24
SETTINGS SCREEN
AA AB
Fine tune your spa with a
wide variety of Settings.
Starting from the Main screen, press the Settings
button
to view the Settings screen (A). Press the
navigation arrows or swipe to view all of the
Settings screens.
Heat
Make sure your spa is heated and ready to enjoy with
Heat Settings. (view page 22).
Filter
Keep your spa water clean and ready to enjoy by
setting Filter Cycles (view page 13).
Time
Set the Time to insure scheduled features have proper
timing (view page 9).
Reminders
Reminders (A) are helpful spa maintenance messages
that display periodically.
Locks
Lock the Panel and/or Setting (view page 15).
Light Cycle
(Optional)
If you want the spa lights to turn On and Off at a
specific times, use Light Cycle (A).
Hold
Hold (B) is used to disable the pumps during service
functions like cleaning or replacing the filter. Hold
Mode will last for 1 hour unless the mode is exited
manually. If spa service will require more than an hour,
it may be best to simply shut down power to the spa.
The Hold Icon on the Settings Screen places the spa
in Hold Mode and displays the System Hold screen.
Touch Back to exit Hold Mode.
spaTouch
™
3 User Guide 42344_Rev D 24
SETTINGS SCREEN
AA AB
Fine tune your spa with a
wide variety of Settings.
Starting from the Main screen, press the Settings
button
to view the Settings screen (A). Press the
navigation arrows or swipe to view all of the
Settings screens.
Heat
Make sure your spa is heated and ready to enjoy with
Heat Settings. (view page 22).
Filter
Keep your spa water clean and ready to enjoy by
setting Filter Cycles (view page 13).
Time
Set the Time to insure scheduled features have proper
timing (view page 9).
Reminders
Reminders (A) are helpful spa maintenance messages
that display periodically.
Locks
Lock the Panel and/or Setting (view page 15).
Light Cycle
(Optional)
If you want the spa lights to turn On and Off at a
specific times, use Light Cycle (A).
Hold
Hold (B) is used to disable the pumps during service
functions like cleaning or replacing the filter. Hold
Mode will last for 1 hour unless the mode is exited
manually. If spa service will require more than an hour,
it may be best to simply shut down power to the spa.
The Hold Icon on the Settings Screen places the spa
in Hold Mode and displays the System Hold screen.
Touch Back to exit Hold Mode.
spaTouch
™
3 User Guide
42344_Rev D 24
SETTINGS SCREEN
AA AB
I II
Fine tune your spa with a
wide variety of Settings.
Starting from the Main screen, press the Settings
button
to view the Settings screen (A). Press the
navigation arrows or swipe to view all of the
Settings screens.
Heat
Make sure your spa is heated and ready to enjoy with
Heat Settings. (view page 22).
Filter
Keep your spa water clean and ready to enjoy by
setting Filter Cycles (view page 13).
Time
Set the Time to insure scheduled features have proper
timing (view page 9).
Reminders
Reminders (A) are helpful spa maintenance messages
that display periodically.
Locks
Lock the Panel and/or Setting (view page 15).
Light Cycle
(Optional)
If you want the spa lights to turn On and Off at a
specific times, use Light Cycle (A).
Hold
Hold (B) is used to disable the pumps during service
functions like cleaning or replacing the filter. Hold
Mode will last for 1 hour unless the mode is exited
manually. If spa service will require more than an hour,
it may be best to simply shut down power to the spa.
The Hold Icon on the Settings Screen places the spa
in Hold Mode and displays the System Hold screen.
Touch Back to exit Hold Mode.
spaTouch
™
3 User Guide 42344_Rev D 24
SETTINGS SCREEN
AA AB
Fine tune your spa with a
wide variety of Settings.
Starting from the Main screen, press the Settings
button
to view the Settings screen (A). Press the
navigation arrows or swipe to view all of the
Settings screens.
Heat
Make sure your spa is heated and ready to enjoy with
Heat Settings. (view page 22).
Filter
Keep your spa water clean and ready to enjoy by
setting Filter Cycles (view page 13).
Time
Set the Time to insure scheduled features have proper
timing (view page 9).
Reminders
Reminders (A) are helpful spa maintenance messages
that display periodically.
Locks
Lock the Panel and/or Setting (view page 15).
Light Cycle
(Optional)
If you want the spa lights to turn On and Off at a
specific times, use Light Cycle (A).
Hold
Hold (B) is used to disable the pumps during service
functions like cleaning or replacing the filter. Hold
Mode will last for 1 hour unless the mode is exited
manually. If spa service will require more than an hour,
it may be best to simply shut down power to the spa.
The Hold Icon on the Settings Screen places the spa
in Hold Mode and displays the System Hold screen.
Touch Back to exit Hold Mode.
spaTouch
™
3 User Guide
42344_Rev D 24
SETTINGS SCREEN
AA AB
Fine tune your spa with a
wide variety of Settings.
Starting from the Main screen, press the Settings
button
to view the Settings screen (A). Press the
navigation arrows or swipe to view all of the
Settings screens.
Heat
Make sure your spa is heated and ready to enjoy with
Heat Settings. (view page 22).
Filter
Keep your spa water clean and ready to enjoy by
setting Filter Cycles (view page 13).
Time
Set the Time to insure scheduled features have proper
timing (view page 9).
Reminders
Reminders (A) are helpful spa maintenance messages
that display periodically.
Locks
Lock the Panel and/or Setting (view page 15).
Light Cycle
(Optional)
If you want the spa lights to turn On and Off at a
specific times, use Light Cycle (A).
Hold
Hold (B) is used to disable the pumps during service
functions like cleaning or replacing the filter. Hold
Mode will last for 1 hour unless the mode is exited
manually. If spa service will require more than an hour,
it may be best to simply shut down power to the spa.
The Hold Icon on the Settings Screen places the spa
in Hold Mode and displays the System Hold screen.
Touch Back to exit Hold Mode.
spaTouch
™
3 User Guide
42344_Rev D 24
SETTINGS SCREEN
AA AB
Fine tune your spa with a
wide variety of Settings.
Starting from the Main screen, press the Settings
button
to view the Settings screen (A). Press the
navigation arrows or swipe to view all of the
Settings screens.
Heat
Make sure your spa is heated and ready to enjoy with
Heat Settings. (view page 22).
Filter
Keep your spa water clean and ready to enjoy by
setting Filter Cycles (view page 13).
Time
Set the Time to insure scheduled features have proper
timing (view page 9).
Reminders
Reminders (A) are helpful spa maintenance messages
that display periodically.
Locks
Lock the Panel and/or Setting (view page 15).
Light Cycle
(Optional)
If you want the spa lights to turn On and Off at a
specific times, use Light Cycle (A).
Hold
Hold (B) is used to disable the pumps during service
functions like cleaning or replacing the filter. Hold
Mode will last for 1 hour unless the mode is exited
manually. If spa service will require more than an hour,
it may be best to simply shut down power to the spa.
The Hold Icon on the Settings Screen places the spa
in Hold Mode and displays the System Hold screen.
Touch Back to exit Hold Mode.
spaTouch
™
3 User Guide 42344_Rev D 24
SETTINGS SCREEN
AA AB
Fine tune your spa with a
wide variety of Settings.
Starting from the Main screen, press the Settings
button
to view the Settings screen (A). Press the
navigation arrows or swipe to view all of the
Settings screens.
Heat
Make sure your spa is heated and ready to enjoy with
Heat Settings. (view page 22).
Filter
Keep your spa water clean and ready to enjoy by
setting Filter Cycles (view page 13).
Time
Set the Time to insure scheduled features have proper
timing (view page 9).
Reminders
Reminders (A) are helpful spa maintenance messages
that display periodically.
Locks
Lock the Panel and/or Setting (view page 15).
Light Cycle
(Optional)
If you want the spa lights to turn On and Off at a
specific times, use Light Cycle (A).
Hold
Hold (B) is used to disable the pumps during service
functions like cleaning or replacing the filter. Hold
Mode will last for 1 hour unless the mode is exited
manually. If spa service will require more than an hour,
it may be best to simply shut down power to the spa.
The Hold Icon on the Settings Screen places the spa
in Hold Mode and displays the System Hold screen.
Touch Back to exit Hold Mode.
spaTouch
™
3 User Guide
42344_Rev D 24
SETTINGS SCREEN
AA AB
Fine tune your spa with a
wide variety of Settings.
Starting from the Main screen, press the Settings
button
to view the Settings screen (A). Press the
navigation arrows or swipe to view all of the
Settings screens.
Heat
Make sure your spa is heated and ready to enjoy with
Heat Settings. (view page 22).
Filter
Keep your spa water clean and ready to enjoy by
setting Filter Cycles (view page 13).
Time
Set the Time to insure scheduled features have proper
timing (view page 9).
Reminders
Reminders (A) are helpful spa maintenance messages
that display periodically.
Locks
Lock the Panel and/or Setting (view page 15).
Light Cycle
(Optional)
If you want the spa lights to turn On and Off at a
specific times, use Light Cycle (A).
Hold
Hold (B) is used to disable the pumps during service
functions like cleaning or replacing the filter. Hold
Mode will last for 1 hour unless the mode is exited
manually. If spa service will require more than an hour,
it may be best to simply shut down power to the spa.
The Hold Icon on the Settings Screen places the spa
in Hold Mode and displays the System Hold screen.
Touch Back to exit Hold Mode.
spaTouch
™
3 User Guide
42344_Rev D 24
SETTINGS SCREEN
AA AB