manualshive.com logo in svg

Hanna Instruments HI 3221, Instruction Manual, Page: 44 / 68

Share
Download
Hanna Instruments HI 3221 Instruction Manual Download Page 44

44

Notes:

• At Power Off the current lot is automatically closed.
• If the 600 records space or 100 lots are reached, the “Log

space is full” message will be displayed.

• Enter View Log Data mode and delete lots in order to free

space.

VIEW LOGGED DATA

Press the 

Recall 

function key to retrieve the information stored while in

measurement mode for the specific range. If the 

Recall 

function key is not

displayed press 

MENU 

key.

The Recall selection screen is displayed.

Press the corresponding function key to view the records.
If 

Man.Log

 is pressed, the list of records is displayed.

If no data were logged, the instrument will display 

“No Records”

 message.

Use 

ARROW 

keys to scroll between the records from the list.

Press 

Delete All

 to enter 

Delete All screen.

Press 

Delete 

to enter 

Delete records screen.

Press 

More 

to view more information of the focused record.

If 

More 

is pressed.

Use 

ARROW 

keys to scroll between complete log information.

Summary of Contents for HI 3221





































































Reviews:

No comments