19
INST
ALLA
TION
Flow Cell Installation
In a flow cell configuration, the water flows from the inlet valve to the flow cell and returns in the line
via the outlet valve.
To prepare the inlet and outlet valve assemblies, as illustrated in the drawing:
• Mount the saddle for flow cell inlet and outlet valve, follow mounting recommendations for saddle.
• Sparingly lubricate two O-rings (2) with a thin film of grease and mount them on the nipple (1)
on both sides.
• Screw the nipple in the saddle (3).
• Screw the valve (4) into the open end of the nipple mounted into the saddle. Make sure it is tight
and the lever is forward facing so that it can be operated.
• Carefully screw the straight tubing fitting (5) into the valve, taking care not to damage the O-ring.
• Insert the tubing (6) in the straight tubing fitting (5).
Position Description
1
Nipple
2
O-ring
3
Saddle
4
Valve
5
Tubing fitting
6
Tubing
6
5
4
2
2
3
1
